Alumunium Billet
INALUM produces 6xxx series Aluminum Billets (6061, 6063, etcetera) with 5, 7, and 8 inches diameter. Billets are used as a mixture of materials for railroad cars and motor vehicle frames and are used extensively in roof and building construction.
The production for Inallet uses a fully automatic equipment which provides several advantages including:
- The Electromagnetic stirrer from ABB which ensure more homogeneous products
- Vertical direct casting from Hycast with Gas Cushion from Hycast has been recognized for its superiority in the billet manufacturing industry so as to guarantee the product's quality and ensure maximum separation of hydrogen content and other inclusion materials
- Homogenizing batches from Herwitch- Austria which produce products that require lower extrusion pressure, higher mechanical properties and easy final processing
Aluminum Billets, Shaping the Future of Versatile Aluminum Products.
Unveiling Perfection: Elevating Product Quality with Unparalleled Advantages
The above advantages benefit the products with minimal surface segregation, thinner shell zone, finer grain structure, smoother surface appearance, less oxide produced and lower surface porosity
| Element | 6005 | 6063 | 6061 | 6463 | 6060 |
|---|---|---|---|---|---|
| Si | 0,65-0,75 | 0,20-0,60 | 0,40-0,80 | 0,38-0,42 | 0,38-0,42 |
| Fe | 0,25 Max | 0,25 Max | 0,25 Max | 0,10-0,125 | 0,15-0,24 |
| Cu | 0,10 Max | 0,10 Max | 0,20-0,30 | 0,11-0,17 | 0,02 Max |
| Ti | 0,01-0,02 | 0,02-0,03 | 0,01-0,02 | 0,01-0,02 | 0,02 Max |
| Mn | 0,05-0,09 | 0,01 Max | 0,03-0,09 | 0,10 Max | 0,02-0,05 |
| Mg | 0,48-0,58 | 0,50-0,58 | 0,85-1,00 | 0,55-0,62 | 0,40-0,53 |
| Zn | 0,10 Max | 0,10 Max | 0,10 Max | 0,10 Max | 0,02 Max |
| Cr | 0,0255-0,085 | 0,10 Max | 0,05-0,09 | 0,01 Max | 0,02 Max |
| Other Each | 0,1 Max | 0,1 Max | 0,1 Max | 0,05 Max | 0,05 Max |
| Others Total | 0,05 Max | 0,05 Max | 0,05 Max | 0,15 Max | 0,05 Max |
Crafting Aluminum Billets with Unmatched Dimensions and Tolerances
| Diameter | 5 inch = 127 mm +- 1 mm 7 inch = 178 mm +- 2 mm 8 inch = 203 mm +- 2 mm |
| Weight | 5 inch = +- 198 kg 7 inch = +- 388 kg 8 inch = +- 506 kg |
| Length | Billet = 5.800 mm +- 6mm Log = 1,001 mm - 6,000 +- 15mm |
| Curvature | Billet = Max. 1 mm/meter |
| Tolerance | Billet = Max. 6 mm/5,8 meter (1 mm/meter) |
